L'Aérien Rectangular H-shaped worktop base in round steel tubes Ø 10.16 cm

For a top at the end of an island or as a return, one leg is enough — L'AÉRIEN is sold per unit. The number of legs and reinforcements depend on the top material and the plan set by the kitchen designer. For long tops or heavy materials, add LE RAIDISSEUR under the top or LE RENFORT for a cantilever overhang.

Yes. The 80 cm of the leg covers a standard 60 cm deep cabinet with an overhang. This overhang creates a semi-supported worktop: the top rests partly on the base cabinets, partly on the leg. For a worktop, plan a top of at least 80 cm wide. If your cabinets have a different depth, check the overhang before ordering.

The 71 cm and 89 cm models share the same Ø 101.6 mm section, the same 800 × 101.6 mm top plate and the same 9 finishes.

The 20 cm furniture leg has a Ø 26.5 mm steel section, a 38 × 5 cm top plate and 3 finishes: Black, White, Varnished.

Yes. L'AÉRIEN holds 100 kg per leg, compatible with tops in solid wood, marble, natural stone, HPL laminate, HPL compact and ceramic with reinforcement.

The 4 round Ø 6.5 mm holes and the included wood screws allow a standard fixing for wood tops from 22 mm thickness.

For mineral materials — marble, natural stone, thick HPL compact —, check the fixing recommendations from the top supplier based on its thickness and nature.

This table base is available in nine professional-quality finishes that don't just look good - they protect.

Fine-texture powder-coated finishes: matt black (RAL 9005), high-gloss white (RAL 9003), cream (RAL 9001), green (RAL 6011), yellow (RAL 1023), blue (RAL 5002).

Metallic sandblasted effect powder-coated finishes: copper (Y2304I), gold (Y2316F).

Powder coating involves baking electrostatic polyester powder at 200°C. The result? A 60-80 micron protective coating that resists :

- Humidity: Rust-free, sheltered outdoor use (covered terrace, veranda)

- UV: No discoloration in sunlight

- Impact: Harder than simple varnish

- Corrosion: Integrated anti-corrosion protection.

It's THE professional finish par excellence for furniture that lasts

Protected raw finish: dark matte varnish (ADAPTA).

Find out more about our finishes, their meanings and decorating tips and tricks.

These finishes are resistant to humidity and UV, and suitable for sheltered indoor or outdoor use.

For custom color requests, please contact us.

Yes, but with the right finish.

• Indoors: All finishes are ideal
• Sheltered exterior (covered terrace, pergola, veranda): Powder-coating recommended for maximum durability (10+ years maintenance-free)
• Unsheltered exteriors: Not recommended (even with powder coating, water accumulation in the tubes could pose a long-term problem)

Ultra-simple care:

• Regular cleaning: damp cloth + mild soap (pH neutral), then dry with a dry cloth
• White stains (limescale): Soft cloth soaked in white vinegar or cider vinegar, rinse, dry
• Sheltered exterior: Clean 2 times a year to remove pollen and dust

Absolutely avoid:

- Abrasive products (scraping sponge, scouring powder)

- High-pressure cleaners

- Undiluted acidic products

To find out more, see our complete guide to steel maintenance at table legs .

Eco-responsibility is not just wishful thinking at Ripaton, but our daily commitment.

By choosing Ripaton, you are opting for locally manufactured products, designed with respect for the environment and craftsmanship.
More than just a table stand or shelf, it's a commitment to timeless, sustainable design.

In our Montpellier workshop, each product is designed locally, using only green, renewable energy.

The manufacture of steel, an infinitely recyclable material, is part of an eco-responsible approach that involves sourcing from certified European suppliers.

By choosing our products, you are opting for sustainable products designed to minimize environmental impact.
The longevity of our products reduces the need for frequent replacement, contributing to more sustainable consumption.

Our packaging? Made entirely from recycled and recyclable cardboard .

Our circular philosophy is also reflected in the reuse of our steel scraps: nothing is lost, everything is transformed. From bed frame legs to design furniture legs, each fragment finds its new life.

A responsible process for better production.

Delivery times in France: 48 h at home or in a relay point (working days), depending on destination for products in stock.

Delivery in the European Union: 48 to 72 h for products in stock.

Returns: you have 30 days after receipt to request an exchange, credit note or refund (excluding custom-made products).