Le Ressourçant Shower shelf in powder-coated steel with no-drill adhesive fastening

The 3M adhesive works best on smooth, clean, dry surfaces: tiles, glass, painted metal, laminate, smooth painted walls.

It is not suited to porous walls, bare wood, crumbling plaster or rough surfaces. Clean with 70° alcohol, remove limescale and dry before mounting.

Each shelf holds up to 4 kg, on a properly prepared smooth surface with 12 h curing observed before first loading.

Outside current promotions, the set of 2 is offered at €120 versus €138 for two shelves bought separately (€69 each), a €18 saving.

It equips the whole shower in one order, creates two matching storage zones and provides 8 kg total capacity across two fixings. For a minimal need, the single shelf remains available. For corner storage, L'APAISANT completes the range.

Choose based on your home, the surface and your needs.

The adhesive shower shelf uses 3M to preserve walls and mount without work.

Each shelf mounts in minutes with the supplied 3M adhesive strips.

Step 1: clean and degrease the wall with 70° alcohol, remove limescale with white vinegar if needed, dry fully.

Step 2: peel the film, position the shelf, press firmly for 30 seconds across the full surface.

Step 3: allow 12 h before first loading.

Check the surface is clean, limescale-free, smooth and completely dry. Observe the 12 h curing time before any loading.

Once bonded, the shelf cannot be moved without damaging the adhesive strip. Removal is possible but not advised, as the strip loses its grip.

To remount elsewhere, replace it with a new 3M strip of the same size.

The drainage slots cut into the profile let water flow out instead of pooling under bottles and soap.

The result: faster drying, less limescale and powder-coated steel that keeps its look in a wet room.

Yes, the adhesive tape is designed to resist ambient humidity, making it ideal for the bathroom.

The adhesive shower shelf is made from galvanized steel, offering improved resistance to rust.

Its powder-coated finish provides an extra layer of protection, enabling the shelf to retain its integrity even in rooms with high humidity.

These technical characteristics features significantly extend shelf life without fear of deterioration.

LE RESSOURÇANT is available in 7 moisture-resistant finishes. These sober, contemporary shades blend in with all bathroom interior styles.

The powder-coated finish provides excellent resistance to wear, corrosion and scratches.

Matte Black fine texture - RAL 9005: Deep black powder-coating with light-diffusing micro-texture. This timeless finish blends in with all decorative styles and offers optimum resistance to the micro-scratches of everyday use.

Grey green - RAL 7030: Matt grey-green powder-coating combining shades of green clay and slate. This natural mineral shade complements contemporary and Scandinavian interiors, and is particularly suited to bathrooms, where it naturally masks limescale marks.

Matt creamy white - RAL 9001: Off-white powder coating with warm beige nuances, evoking the natural color of unbleached wool. This soft hue illuminates spaces and creates a natural harmony with light wood and organic materials.

Terracotta - RAL 8004: Matt terracotta powder coating in terracotta shades between brick red and orange-brown. Warm and organic, this shade softens water features while warming the ambience, ideal with light wood, rattan, linen and sand accessories.

Matte ochre yellow - RAL 1024: A golden, slightly earthy matte ochre yellow powder coating that diffuses soft light without dazzling. Warms up the bathroom or hallway without dominating, works particularly well with honey wood, travertine, sandstone and matte black accents.

Silver metallic matte - YW275I: Fine pearl-gray powder-coating, matte and discreet, inspired by brushed metal. A bright, contemporary look that enhances lines, easy to match in bathrooms with white marble, glass, waxed concrete and light wood.

Colors or shades may vary according to features and settings, such as brightness or calibration of the device used for display.

Powder coating offers superior protection to standard paint, but requires gentle care to preserve its anti-corrosion properties.

Daily cleaning: wipe with a slightly damp microfibre cloth.

Deep cleaning: warm soapy water (neutral washing-up liquid), rinse and dry immediately. For stubborn marks, a water and white vinegar mix (3:1 ratio) is sufficient.

Adhesive fixing maintenance: check the bond monthly, especially in a wet room. If partial peeling occurs, remove and reposition with new 3M VHB adhesive strips.

Avoid: abrasive products, bleach, solvents, abrasive sponges, metal scrapers, acetone and 90° alcohol — all of which attack or dissolve the powder-coated finish.

To learn more about steel maintenance, read our guide to caring for steel table legs.

Each shower shelf is designed and powder-coated in our Montpellier workshop from steel, and shipped in recycled cardboard packaging.

Returns: you have 30 days after receipt to request an exchange, a credit note or a refund (excluding made-to-measure products).

In-stock product: 48 h delivery in France (home or pickup point, working days), 48 to 72 h in the European Union.

Note: any support already mounted cannot be returned or exchanged.