Appreciated
by over 50,000
satisfied customers
Payment
in instalments
free of charge
Free delivery from €299
France, Belgium
Germany, Netherlands
Back
within 30 days
excluding custom orders
-
Products from the same category
-
✓ Galvanized steel powder-coatedshower corner shelf , 30 × 13 cm, adhesive fastening
✓ Ideal for keeping your shower gel, shampoo within easy reach - up to 4 kg supported
✓ Shower corner shelf with 12 cm rim, and drainage slots for draining water
✓ Moisture-resistant powder-coated finishes: fine-textured matte black, cream white, gray green.
✓ Adhesive strips supplied: quick installation without drilling - 12 h setting time before use.
Choose your solutionwall mountingDepending on the constraints of your home, the type of surface and your modularity needs.
COMPARISON CHART - CORNER WALL-MOUNTED SHOWER SHELVES | ||
Criteria | Adhesive corner shelf | Screw-in corner shelf |
Installation | Tool-free, 15 minutes, surface cleaning required | Drill, screws, wall plugs adapted to the wall |
Wall compatibility | Tiles, glass, mirrors, metal, melamine, painted walls | Concrete, brick, plasterboard, solid wood, stone |
Load capacity | 4 kg | 5 to 20 kg depending on mounting and support |
Ideal for | Tenants, modular decor, wet rooms | Homeowners, intensive use, heavy loads |
Repositioning | Possible with new adhesives | Definitive, permanent holes |
Service life | 1 to 3 years depending on use | 10 years and over |
Removal | Clean removal, light residue | Filling and touching up required |
Installation budget | Included, ready to install | Additional hardware and tools |
Recommended parts | Bathroom, kitchen | Bathroom, kitchen, workshop, garage, garden |
Select the adhesive fastening for flexibility and wall preservation, the drilling for ruggedness and intensive use.
Adhesive fastening is optimized for smooth, clean, dry surfaces: tiles, glass, painted metal, laminate, painted walls.
It is not suitable for porous walls, untreated wood, crumbly plaster or non-smooth damp surfaces.
Installation takes just a few minutes, thanks to the supplied 3M adhesive tape.
3-step installation - Total duration: 15 min + 12h drying time
STEP 1 -Surface preparation(10 min)
Clean and dry your wall thoroughly (free of limescale and dust).
- Cleaning degreaser: 70° alcohol or household degreaser
- Limescale removal: white vinegar if necessary
- Completely dry: wait 5 min minimum
STEP 2 -Installation(2 min)
Remove the protective film, then apply the shower corner shelf with firm pressure.
- Final positioning (no second chance)
- Firm pressure for 30 seconds over the entire surface
STEP 3 -Polymerization(12h)
Leave for 12 hours before hanging up your towels or clothes, to ensure lasting adhesion.
- Do not stress adhesive
- Resistance test after only 12 hours
What if the adhesive shower corner shelf doesn't hold ?
Check the surface: it must be clean, free of limescale, dust-free, smooth and perfectly dry.
Respect the 12-hour unloading period.
The self-adhesive shower corner shelf supports up to 4 kg, provided the wall is suitable and the surface has been properly prepared.
Once glued, theCorner shower shelfCannot be moved without damaging theadhesive tape.
Removal is possible but not recommended, as the tape may lose its adhesive power and leave traces.
For optimum hold, a single application is recommended.
However, it can be re-adhered at another location by replacing the adhesive with a new 3M tape of the same format.
Yes. The adhesive tape is designed to withstand ambient humidity, making it ideal for the bathroom.
Protected from corrosion and splashes by the powder coating, the shower shelf is perfectly resistant to humidity.
L'APAISANT is available in three moisture-resistant finishes. These sober, contemporary shades can be integrated into any interior style, from the classic bathroom to the kitchen.
Matte black fine texture - RAL 9005 :Deep black powder-coating with light-diffusing micro-texture. This timeless finish blends in with all decorative styles and offers optimum resistance to the micro-scratches of everyday use.
Grey green - RAL 7030 :Green-gray matte powder coating combining shades of green clay and slate. This mineral shade harmonizes with contemporary and modern interiors Scandinavian, particularly well-suited to water features, where it naturally masks limescale marks.
Matt cream white - RAL 9001 :Powder coating off-white in warm beige hues, evoking the natural color of unbleached wool. This soft hue illuminates spaces and creates a natural harmony with light wood and organic materials.
Visit powder coating Offers superior protection to standard paint but requires gentle maintenance to preserve its properties anti-corrosion.
Daily cleaning: wipe with a slightly damp microfiber cloth.
Thorough cleaning: use lukewarm soapy water (neutral washing-up liquid), then rinse and dry immediately. For stubborn marks, a 3:1 mixture of water and white vinegar is sufficient.
Adhesive bonding maintenance: Check bonding strength monthly, especially in damp rooms. If partial delamination occurs, remove and reposition with new 3M VHB adhesives.
Absolutely avoid :
Avoid abrasive products, bleach and solvents that attack the powder coating.
Aggressive chemicals, abrasive sponges, metal scrapers that permanently scratch powder coatings.
Never use acetone or 90° alcohol, which will dissolve the coating.
Find out more about steel maintenance, we recommend that you read our maintenance guide for steel table legs.
Like all our wall mounts, , L'APAISANT is designed in our Montpellier workshop from recyclable steel.
Each shower angel shelf is powder-coated on site, and dispatched in a plastic box recycled cardboard, for a sustainable, eco-responsible product.
Delivery times in France :48 h at home or in a relay point(working days), depending on destination for products in stock.
Delivery within the European Union :48 to 72 hours for products in stock.
Returns: you have 30 days after receipt to request an exchange, credit note or refund (excluding made-to-measure products).
Price per unit