L'Épuré Wall-mounted sponge holder in powder-coated steel with no-drill adhesive fastening

Choose your wall-mounting solution according to the constraints of your home, the type of surface and your need for modularity.

Choose adhesive fastening for flexibility and wall protection, or drilled fastening for sturdiness and intensive use.

Adhesive fixing is optimized for smooth, clean, dry surfaces: tiles, glass, painted metal, laminate, painted walls.

It is not suitable for porous walls, untreated wood, crumbly plaster or damp, unsmooth surfaces.

Installation takes just a few minutes thanks to the 3M adhesive tape supplied.

3-step installation - Total time: 15 min + 12h drying time

STEP 1 - Surface preparation (10 min)

Thoroughly clean and dry your wall (free of limescale and dust).

- Cleaning degreaser: 70° alcohol or household degreaser

- Limescale removal: white vinegar if necessary

- Dry completely: wait 5 min minimum

STEP 2 - Installation (2 min)

Remove the protective film, then apply the sponge holder using firm pressure.

- Definitive positioning (no second chances)

- Firm pressure for 30 seconds over the entire surface

STEP 3 - Curing (12h)

Allow to set for 12 hours before use, to ensure lasting adhesion.

- Do not stress adhesive

- Resistance test after 12h only

The adhesive sponge holder can hold up to 1 kg, provided the wall is suitable and the surface has been properly prepared.

Once glued, the sponge holder cannot be moved without damaging the adhesive strip.

Removal is possible but not recommended, as the tape may lose its adhesive strength and leave traces.

For optimum hold, a single application is recommended.
However, it can be re-adhered at another location by replacing the adhesive with a new 3M tape of the same format.

Yes, the adhesive strip is designed to resist ambient humidity, making it ideal for the bathroom.

Protected from corrosion and splashes by powder coating, the sponge holder is perfectly resistant to humidity.

L'ÉPURÉ is available in two moisture-resistant finishes. These sober, contemporary shades blend in with all interior styles, from bathroom to kitchen.

Matte Black fine texture - RAL 9005: Deep black powder coating with light-diffusing micro-texture. This timeless finish blends in with all decorative styles and offers optimum resistance to the micro-scratches of everyday use.

Grey green - RAL 7030: Matt grey-green powder-coating combining shades of green clay and slate. This natural mineral shade complements contemporary and Scandinavian interiors, and is particularly well-suited to bathrooms, where it naturally masks limescale marks.

Matt creamy white - RAL 9001: Off-white powder coating with warm beige nuances, evoking the natural color of unbleached wool. This soft hue illuminates spaces and creates a natural harmony with light wood and organic materials.

Terracotta - RAL 8004: Matt terracotta powder coating in terracotta shades between brick red and orange-brown. Warm and organic, this shade softens water features while warming the ambience, ideal with light wood, rattan, linen and sand accessories.

Matte ochre yellow - RAL 1024: A golden, slightly earthy matte ochre yellow powder coating that diffuses soft light without dazzling. Warms up the bathroom or hallway without dominating, works particularly well with honey wood, travertine, sandstone and matte black accents.

Silver metallic matte - YW275I: Fine pearl-gray powder-coating, matte and discreet, inspired by brushed metal. A bright, contemporary look that enhances lines, easy to match in bathrooms with white marble, glass, waxed concrete and light wood.

Colors or shades may vary according to features and settings, such as brightness or calibration of the device used for display.

Powder coating offers superior protection to standard paint, but requires gentle maintenance to preserve its anti-corrosion properties.


Daily cleaning: wipe with a slightly damp microfiber cloth.

Thorough cleaning: use lukewarm soapy water (neutral dishwashing liquid), then rinse and dry immediately. For stubborn marks, a 3:1 mixture of water and white vinegar is sufficient.

Adhesive fastener maintenance: check bonding strength every month, especially in damp rooms. If partial delamination occurs, remove and reposition with new 3M VHB adhesives.

Absolutely avoid:

Avoid abrasive products, bleach and solvents, which attack the powder-coated finish.
Aggressive chemicals, abrasive sponges and metal scrapers permanently scratch the powder coating.
Never use acetone or 90° alcohol, which dissolve the finish.

To find out more about maintaining steel, we recommend reading our guide to maintaining steel table legs.

Like all our wall holders, L'ÉPURÉ is designed in our Montpellier workshop, from recyclable steel.
Each sponge holder is powder-coated on site, and shipped in recycled cardboard packaging, for a sustainable and eco-responsible product.

Please note: Any bracket already assembled cannot be returned or exchanged.

Delivery times in France: 48 h at home or in a relay point (working days), depending on destination for products in stock.

Delivery in the European Union: 48 to 72 h for products in stock.

Returns: you have 30 days after receipt to request an exchange, credit note or refund (excluding custom-made products).