Appreciated
by over 50,000
satisfied customers
Payment
in instalments
free of charge
Free delivery from €299
France, Belgium
Germany, Netherlands
Back
within 30 days
excluding custom orders
✓ Wall hook in powder-coated galvanized steel, 8 × 3 cm, 4 cm hook, adhesive fastening
✓ Ideal for keeping your towel, bathrobe, accessory close at hand - up to 4 kg supported
✓ Versatile, also suitable for theentrance, bedroom or kitchen to hang clothes or utensils
✓ 6 moisture-resistant powder-coated finishes: Matte Black, Gray Green, Cream, Ochre Yellow, Silver, Terracotta.
✓ 3M adhesive strips included: quick install, no drilling, permanent bond in 12 h.
Appreciated
by over 50,000
satisfied customers
Payment
in instalments
free of charge
Free delivery from €299
France, Belgium
Germany, Netherlands
Back
within 30 days
excluding custom orders
| Material | Galvanized steel |
| Steel section | 1.5 mm thick |
| Assembly | Bent steel |
| Weight of the coat hook | 0.1 kg |
| Length | 8 cm |
| Width | 3 cm |
| Depth - Hook | 4 cm |
| Holes | None |
| Finishes | Powder coating |
| Wall mounting | Adhesive strips included |
| Maximum load | 3 kg |
LE MALIN is a no-drill wall-mounted coat hook in folded steel.
Made from 1.5 mm thick powder-coated steel, this towel hookis moisture-resistant for everyday use in any room of the house.
With its compact 8 × 3 cm dimensions and rounded 4 cm hook, it can support loads of up to 3 kg.
Its adhesive fastening uses high-performance 3M strips, enabling installation without drilling, screws or tools in just a few minutes. A 12-hour drying time guarantees long-lasting adhesion to all types of surface.
This design wall hook is available in three contemporary finishes: matte black, grey green, creamy white, ochre yellow, terracotta and silver, blending harmoniously with all modern interior styles. Its rounded shape with no sharp edges ensures safety and ease of use for the whole family.
Ideal for rental apartments, tiled bathroom walls, kitchens and all fragile surfaces where traditional drilling is impossible or undesirable.
Combine wall hooks with other products from our collections of wall shelves and wall brackets with complementary functions to create decorative wall storage.
This wall-mounted coat hook adapts to all your living spaces thanks to its adhesive installation and multiple uses.
In the bathroom, LE MALIN becomes a wall hook for towels, bathrobes near the shower or sink.
Transform your entryway with this decorative wall hook that installs as a versatile, modularcoat rack for hanging jackets, blousons, handbags, backpacks, scarves, hats and caps.
Positioned in the kitchen near the sink, behind a door, this adhesive hook becomes a dishcloth holder, optimizing the storage of kitchen aprons and oven gloves without piercing your walls and tiles.
LE MALIN provides a wall-mounted storage solution for bedrooms and offices. Installed behind a door or in a dressing room, this wall hook will help you organize bathrobes, pyjamas, dresses or suits without taking up floor space.
This no-drill hook preserves the integrity of your walls and coverings, and remains reusable.Repositionable with new adhesive strips to suit your furnishing needs.
Craftsmanship
French manufacturing
Distribution & Logistics
Montpellier workshop
Technical expertise
Project planning
Optimum sturdiness
Perfect adaptability
Solid furniture
built to last
Quality materials
European suppliers
Design office
creative and innovative
Innovative design,
ethical and authentic
The 3M adhesive works best on smooth, clean, dry surfaces: tiles, glass, painted metal, laminate, smooth painted walls. It is not suited to porous walls, bare wood, crumbling plaster or rough surfaces. Clean with 70° alcohol, remove limescale and dry before mounting.
Each hook holds 3 kg, up to 9 kg for the trio spread across three separate fixings. This assumes a properly prepared smooth surface and the 12 h cure observed before loading. That is enough for towels, bathrobes, bags, coats and everyday accessories.
Choose based on your home, the surface and your needs.
| Criterion | Adhesive (3M) | Drilled |
|---|---|---|
| Wall preserved | Yes, no holes | No, permanent drilling |
| Ideal surface | Smooth: tiles, glass, painted metal | Any load-bearing wall |
| Load per hook | 3 kg | Higher, depends on plug |
| Install | Minutes, no tools | Drill required |
| Best for | Rental, tiles, humid room | Heavy use, heavy load |
LES MALINS use 3M adhesive to preserve walls and mount without work.
Both hooks share the folded steel, the 4 cm rounded hook, the 3M adhesive and the 3 kg load. The choice depends on what you hang.
| Criterion | Standard hook | Large hook |
|---|---|---|
| Wall footprint | 8 × 3 cm | 8 × 8 cm |
| Hook depth | 4 cm | 4 cm |
| Load per hook | 3 kg | 3 kg |
| Ideal for | Towels, coats, accessories | Bag handles, collars of bathrobes and coats |
The large base holds handles and collars better.
Each hook mounts in minutes with the supplied 3M adhesive strips.
Step 1: clean and degrease the wall with 70° alcohol, remove limescale with white vinegar if needed, dry fully.
Step 2: peel the film, position the hook, press firmly for 30 seconds (final position, no second chance).
Step 3: let it cure 12 h before hanging your items.
Once bonded, the hook cannot be moved without damaging the adhesive strip.
Removal is possible but not advised, as the strip loses its grip and may leave marks.
To remount elsewhere, replace it with a new 3M strip of the same size.
Once glued, the wall hook cannot be moved without damaging the adhesive tape.
Removal is possible but not recommended, as the adhesive strip may lose its stickiness and leave marks.
For optimum hold, a single application is recommended.
However, it can be repositioned by replacing the adhesive with a new 3M tape of the same format.
Yes. The 3M strip is designed to resist ambient humidity, ideal in a bathroom.
Protected against corrosion by the powder coating and galvanised steel, the hook resists splashes and suits hanging towels and bathrobes near the basin or shower, in a bathroom or utility room.
LE MALIN is available in three moisture-resistant finishes. These sober, contemporary shades blend into any interior style, from bathroom toentrance hall.
Matte Black fine texture - RAL 9005: Deep black powder coating with light-diffusing micro-texture. This timeless finish blends in with all decorative styles and offers optimum resistance to the micro-scratches of everyday use.
Grey green - RAL 7030 : Matt grey-green powder-coating combining shades of green clay and slate. This natural mineral shade complements contemporary and Scandinavian interiors, and is particularly suited to bathrooms, where it naturally masks limescale marks.
Matt creamy white - RAL 9001: Off-white powder coating with warm beige nuances, evoking the natural color of unbleached wool. This soft hue illuminates spaces and creates a natural harmony with light wood and organic materials.
Terracotta - RAL 8004: Matt terracotta powder coating in terracotta shades between brick red and orange-brown. Warm and organic, this shade softens water features while warming the ambience, ideal with light wood, rattan, linen and sand accessories.
Matte ochre yellow - RAL 1024: A golden, slightly earthy matte ochre yellow powder coating that diffuses soft light without dazzling. Warms up the bathroom or hallway without dominating, works particularly well with honey wood, travertine, sandstone and matte black accents.
Silver metallic matte - YW275I: Fine pearl-gray powder-coating , matte and discreet, inspired by brushed metal. Bright, contemporary look that enhances lines, easy to match in bathrooms with white marble, glass, waxed concrete and light wood.
Wipe with a slightly damp microfibre cloth for routine care.
For a deeper clean, use warm soapy water, then rinse and dry. On stubborn marks, a mix of water and white vinegar (3:1) is enough.
Avoid abrasive products, bleach, acetone and 90° alcohol, which attack the coating.
In a wet room, check the bond monthly.
Eco-responsibility is not just wishful thinking at Ripaton, but our daily commitment.
By choosing Ripaton, you are opting for locally manufactured products, designed with respect for the environment and traditional craftsmanship.
More than just a table stand or shelf, it's a commitment to timeless, sustainable design.
In our Montpellier workshop, each product is designed locally, using only green, renewable energy.
Manufactured in steel, an infinitely recyclable material, our eco-responsible approach involves sourcing from certified European suppliers.
By choosing our products, you are opting for sustainable products designed to minimize environmental impact.
The longevity of our products reduces the need for frequent replacement, thus contributing to more sustainable consumption.
Our packaging? Made entirely from recycled and recyclable cardboard .
Our circular philosophy is also reflected in the reuse of our steel off-cuts: nothing is lost, everything is transformed. From bed bases to designer furniture legs, each fragment finds a new life.
A responsible process for better production.
In-stock product: 48 h delivery in France (home or pickup point, working days), 48 to 72 h in the EU.
Returns within 30 days of receipt.
Note: any support already mounted cannot be returned or exchanged.
Is your home beautiful? Show it off!
Mention @ripaton.fr
on your Instagram photos
to appear on our site.
Our (super) customers' opinions
Perfect. Nothing to complain about. (Translated review)
Very good fixing system to test over time. (Translated review)
practical and efficient (Translated review)
Perfect! (Translated review)
Price per unit
