Appreciated
by over 50,000
satisfied customers
Payment
in instalments
free of charge
Free delivery from €299
France, Belgium
Germany, Netherlands
Back
within 30 days
excluding custom orders
✓ Wall-mounted electric toothbrush holder in powder-coated galvanized steel, no drilling required
✓ Compatible with most electric toothbrush models up to Ø 3.4 cm
✓ Compact size 9.4 × 5.2 × 8.5 cm - for 2 slots - rounded corners and drainage
✓ Moisture-resistant: matte black or creamy white powder-coated finishes, easy-care
✓ Adhesive strips supplied: quick wall mounting, 12 h setting time before use.
Appreciated
by over 50,000
satisfied customers
Payment
in instalments
free of charge
Free delivery from €299
France, Belgium
Germany, Netherlands
Back
within 30 days
excluding custom orders
| Material | Folded steel, thickness 1.2 mm |
| Length | 9.4 cm |
| Width | 5.2 cm |
| Height | 8.5 cm |
| Brush slots - Diameter | 2 × 3.4 cm |
| Drain holes - Diameter | 2 × 1 cm |
| Drilling | No |
| Wall mounting | Adhesive strips included |
| Load capacity | 1 kg |
Clean well with 70° alcohol, remove all traces of limescale, and dry your wall thoroughly before installation.
It's advisable to leave your wall to dry for 12 hours before installation.
L'ÉNERGIQUE is the wall-mounted electric toothbrush holder designed to organize your dental care routine and keep your bathroom perfectly tidy.
Made from powder-coated galvanized steel, it offers long-lasting protection against corrosion and daily wear and tear in humid environments.
Its compact dimensions of 9.4 × 5.2 × 8.5 cm accommodate two electric toothbrushes up to 3.4 cm in diameter, while freeing up space on the washbasin surface.
Rounded corners ensure comfort and safety, while drainage holes ensure rapid drying after each use.
Available in matte black or creamy whitepowder-coated finishes , it is splash-proof and easy to maintain.
No tools are required for installation: the adhesive strips supplied guarantee a strong hold, after a 12-hour setting time.
Designed in France in our Montpellier workshop, this wall bracket combines functional design with French know-how.
Whether you're on your own or with your family, L'ÉNERGIQUE helps you organize your bathroom space, and facilitates access to your accessories, for a washbasin area that's always clean and tidy.
Tired of putting your electric toothbrush on the edge of the sink?
L'ÉNERGIQUE has been designed to free up the basin surface and keep the space perfectly organized.
Its double capacity allows you to store two electric toothbrushes side by side, practical for a couple or a family.
Also compatible with electric shavers and hair clippers up to 3.4 cm in diameter, it adapts to the needs of the whole home.
Rounded corners provide comfort and safety, even in small bathrooms where every gesture counts.
Its two 1 cm diameter drainage holes ensure that residual water is evacuated for optimal drying, and can also be used as a cable pass-through for recharging the brush directly on its wall bracket, provided the recharging cable is compatible with this diameter.
Its compact size enables it to fit into tight spaces without cluttering up the washbasin.
Installed close to the faucet, it is resistant to humidity and splashes thanks to its powder-coated finish, which protects the steel from corrosion and daily wear and tear.
For a harmonious ensemble, combine it with our toothbrush holder with integrated shelf for storing electric brush heads and other steel wall shelves for a perfectly organized bathroom.
Craftsmanship
French manufacturing
Distribution & Logistics
Montpellier workshop
Technical expertise
Project planning
Optimum sturdiness
Perfect adaptability
Solid furniture
built to last
Quality materials
European suppliers
Design office
creative and innovative
Innovative design,
ethical and authentic
Installation is performed using the 3M adhesive strips supplied.
Carefully clean the smooth surface (tile, glass or painted wall), position the holder by exerting firm pressure for 30 seconds, then leave to rest for 12 hours without load before first use.
3-step installation - Total time: 15 min + 12 h drying time
STEP 1 - Surface preparation (10 min)
Thoroughly clean and dry your wall (free of limescale and dust).
- Cleaning degreaser: 70° alcohol or household degreaser
- Limescale removal: white vinegar if necessary
- Dry completely: wait 5 min minimum
STEP 2 - Installation (2 min)
Remove the protective film, then apply the wall mount using firm pressure.
- Definitive positioning (no second chances)
- Firm pressure for 30 seconds over the entire surface
STEP 3 - Curing (12h)
Allow to set for 12 hours before use, to ensure lasting adhesion.
- Do not stress adhesive
- Resistance test after 12h only
Once installed, it cannot be moved without damaging the adhesive.
To reposition it, simply replace the strips with new 3M adhesives of the same format.
Gently pull the tab of the adhesive strip parallel to the wall.
If necessary, use a hairdryer to slightly heat the adhesive and facilitate residue-free removal.
Check the surface: it must be clean, limescale-free, dust-free, smooth and perfectly dry.
Respect the 12-hour holding time without load.
This adhesive electric toothbrush holder can support up to 1 kg, provided the wall is suitable and the surface has been properly prepared.
Once glued, the toothbrush holder cannot be moved without damaging the adhesive strip.
Removal is possible but not recommended, as the adhesive strip may lose its stickiness and leave marks.
For optimum hold, a single application is recommended.
However, it can be re-adhered in another place by replacing the adhesive with a new 3M strip of the same format.
L'ÉNERGIQUE holds two electric toothbrushes up to Ø 3.4 cm, compatible with most Oral-B, Philips Sonicare and similar models.
Yes, the holder is also suitable for shavers and clippers with handles up to Ø 3.4 cm.
They evacuate residual water for rapid drying, and can also be used as a grommet for recharging a brush directly on the holder, if the cable is compatible with this diameter.
A damp microfiber cloth is all you need for daily cleaning.
For more thorough cleaning, use warm soapy water and dry immediately.
Avoid abrasive products, solvents and bleach, which damage the powder coating.
Adhesive bonding: regularly check the bonding strength in damp rooms; if necessary, replace theadhesive.
To find out more about maintaining steel, we recommend reading our guide to maintaining steel table legs.
Yes, its powder-coated finish protects the steel from corrosion, splashes and daily wear and tear in damp rooms.
The adhesive is also designed to withstand damp rooms.
Two moisture-resistant finishes:
Matte black fine texture - RAL 9005: sober and timeless, resistant to micro-scratches.
Matte cream white - RAL 9001: warm beige tones, easy to match with light wood and natural materials.
L'ÉNERGIQUE is designed and manufactured in our Montpellier workshop, in recyclable galvanized steel.
Each electric toothbrush holder is powder-coated, and shipped in recycled cardboard packaging, for a sustainable and eco-responsible product.
Delivery times in France: 48 h at home or in a relay point (working days), depending on destination for products in stock.
Delivery in the European Union: 48 to 72 h for products in stock.
Returns: you have 30 days after receipt to request an exchange, credit note or refund (excluding custom-made products).
Is your home beautiful? Show it off!
Mention @ripaton.fr
on your Instagram photos
to appear on our site.
Price per unit
