Appreciated
by over 50,000
satisfied customers
Payment
in instalments
free of charge
Free delivery from €299
France, Belgium
Germany, Netherlands
Back
within 30 days
excluding custom orders
✓ Cylindrical table leg in straight round steel tube Ø 15.9 cm, welded plate Ø 22 cm
✓ Height 71 cm to create dining table, restaurant table, desk, conference table, garden table
✓ Supports 100 kg per leg: 3 legs under round tabletop, 4 legs under square, rectangular or oval tabletop
✓ Tabletop up to 250 cm in solid wood, MDF, marble, granite, terrazzo, compact HPL and tempered glass
✓ Thermolacquered or varnished steel: moisture-resistant indoors and sheltered outdoors, terrace, balcony.
Appreciated
by over 50,000
satisfied customers
Payment
in instalments
free of charge
Free delivery from €299
France, Belgium
Germany, Netherlands
Back
within 30 days
excluding custom orders
| Material | Steel |
| Steel section - Diameter | 159 mm |
| Steel section - Thickness | 3 mm |
| Height | 710 mm |
| Base plate - Diameter | 220 mm |
| Base plate - Thickness | 4 mm thick |
| Maximum load | 100 kg |
| Drill holes | 6.5 mm |
| Screws supplied | yes |
| Glides supplied | Self-adhesive rubber |
| Finishes | Powder-coated, Varnished |
| Assembly | Welded |
For orders of 5 units or more, our team will provide you with a personalized quotation and conditions adapted to your project. Contact our professional team.
| Available models LE DÉVOUÉ | Height |
| For a coffee table or bench | 40 cm |
| For a high table or kitchen island | 89 cm |
| Cylindrical table leg made-to-measure | 30 → 100 cm |
LE DÉVOUÉ is a cylindrical straight table leg in Ø 15.9 cm steel tube for creating a dining table, desk or restaurant table.
Made in Montpellier from 3 mm steel tube, LE DÉVOUÉ consists of a straight cylindrical column, Ø 159 mm, height 710 mm.
At the top, a round collar Ø 220 mm — a 4 mm ring bored to the tube diameter.
At the base, a round plate of the same diameter, 3 mm thick.
The single column carries the load vertically without arms or crossbars: the space under the tabletop stays clear on 360°, the leg positions at the edges, corners or staggered on an oblong, oval or rectangular tabletop up to 250 cm long.
Each column supports 100 kg in solid wood, MDF, marble, granite, terrazzo, compact HPL or tempered glass.
Available in 8 thermolacquered colours or ADAPTA dark matt varnish, the thermolacquering holds against impacts, moisture and UV.
Suitable for indoors and sheltered outdoor settings: covered terraces, balconies, verandas.
Fully welded in the workshop, LE DÉVOUÉ screws to the tabletop through the Ø 6.5 mm holes in the collar using the included screws.
The self-adhesive rubber pads protect the floor.
Pair it with the LE DÉVOUÉ 40 cm under a coffee table to create a consistent look across living room and dining room — same tube, same finish.
In an open kitchen, LE DÉVOUÉ 89 cm carries the same leg under a leg-supported worktop: one tubular signature from dining table to kitchen counter.
Solid wood dining table for living room
Under a live edge tabletop in oak, walnut or beech of 200 × 90 cm, 4 round tube table legs take their place at the corners. Black RAL 9005 columns on raw wood with visible grain : the contrast accentuates the depth without any additional accessory. No crossbar, no stretcher : the floor stays clear across the full width.
Home office or teleworking desk
The 71 cm height meets the ergonomic standard for work surfaces. 4 legs support a 160 × 70 cm tabletop in solid wood or lacquered MDF. Copper Y2304I legs under a light oak top : the home office gains personality without overdoing it.
Garden or sheltered terrace table
An oblong tabletop - narrow, elongated, rounded at the ends - of 140 × 60 cm transforms a balcony or loggia into an outdoor dining table on 4 legs. In yellow RAL 1023 under a white or natural wood top, the base asserts the space without weighing it down. The thermolacquering resists moisture under pergola, veranda or canopy : same colour, same hold, no additional treatment.
Restaurant or café table - B2B project
For rectangular restaurant tables and hotel spaces, the round column leg is used 4 under a 120 × 80 cm tabletop. 100 kg per leg, low-maintenance thermolacquering : the two points that matter in foodservice. Made in France, available per unit or in large quantities for contract projects.
Conference table in professional setting
4 LE DÉVOUÉ on a cylindrical steel base support a bevelled rectangular tabletop with rounded corners of 220 × 100 cm ; the shape softens without reducing seating capacity. Blue RAL 5002 legs under a white tabletop : the meeting room asserts a character, far from standard office furniture.
Round marble dining table for Haussmann-style interiors
3 round legs grouped as a tripod with distinct columns at the centre of a marble tabletop Ø 130 cm form a compact and sculptural triangular base. Black RAL 9005 columns under white veined marble : the black-and-white contrast is immediate, with no decoration. Each column leg supports 100 kg : the marble needs no reinforcement.
Craftsmanship
French manufacturing
Distribution & Logistics
Montpellier workshop
Technical expertise
Project planning
Optimum sturdiness
Perfect adaptability
Solid furniture
built to last
Quality materials
European suppliers
Design office
creative and innovative
Innovative design,
ethical and authentic
The number of legs depends on tabletop shape:
| Tabletop shape | Recommended legs | Configuration |
|---|---|---|
| Round (Ø 60 to 140 cm) | 3 legs | Triangle formation, grouped at the centre of the tabletop |
| Square, rectangular or oval (up to 250 cm) | 4 legs | 1 leg per corner, staggered on larger formats |
Included screws measure 2.5 cm; minimum recommended tabletop thickness: 2 cm.
Minimum recommended thickness: 2 cm. Included screws measure 2.5 cm — for thinner tops, use structural adhesive (epoxy or polyurethane).
LE DÉVOUÉ can be used with tabletops up to 7 cm thick.
Compatible materials: solid wood, MDF, plywood, marble, granite, terrazzo, tempered glass, recycled plastic.
We do not recommend flexible worktops without a supporting structure.
Recommended method: screwing through the Ø 6.5 mm holes in the fixing plate using the included wood screws, on a tabletop at least 2 cm thick.
For non-drillable surfaces (marble, granite, tempered glass), structural adhesive (epoxy or polyurethane) is an option.
The included self-adhesive rubber pads protect the floor and compensate for minor surface irregularities.
Both legs share the same Ø 15.9 cm steel tube and the same 8 thermolacquered finishes - they combine in the same space with total visual consistency. The difference is architectural.
| Criterion | LE DÉVOUÉ | LE DÉLICIEUX ROND LARGE |
|---|---|---|
| Architecture | 4 legs at corners | Single central leg |
| Tabletop format | Rectangular, square, oval up to 250 cm | Round up to Ø 140 cm |
| Load capacity | 100 kg per leg (400 kg on 4 legs) | 100 kg tabletop included |
| Floor plate | Ø 159 mm | Ø 600 mm |
| Space under tabletop | Clear between corners | Clear on 360°, no lateral upright |
| Typical use | Dining table, desk, meeting table | Bistro table, round table, restaurant |
For a rectangular table or large tabletop, choose LE DÉVOUÉ. For a round tabletop or a bistro table with a central leg, LE DÉLICIEUX ROND LARGE.
LE DÉVOUÉ is a single straight column: one tube Ø 159 mm screwed to the tabletop via a round collar Ø 220 mm.
L'ÉPANOUI uses the same tube but assembled as a tripod — three tubes welded at a central node — and is used 2, 3 or 4 per table depending on top format: 2 legs under a narrow oblong top, 3 under a round top, 4 under a rectangular top.
The wider base carries up to 150 kg per leg against 100 kg for LE DÉVOUÉ.
Floor footprint also differs: Ø 159 mm for LE DÉVOUÉ, 3-tube tripod for L'ÉPANOUI.
| Criterion | LE DÉVOUÉ | L'ÉPANOUI |
|---|---|---|
| Structure | Single straight column | Tripod, 3 tubes |
| Tube Ø | 159 mm | 159 mm |
| Max load / leg | 100 kg | 150 kg |
| Floor footprint | Ø 159 mm | 3-tube tripod |
| Recommended legs | 3 to 4 | 2, 3 or 4 |
Both legs are cylindrical round in thermolacquered steel and cover the same uses — dining table, desk, meeting table. The difference lies in tube diameter, load capacity and height customisation.
| Criterion | LE DÉVOUÉ | LE LOYAL ROUND MADE TO MEASURE |
|---|---|---|
| Tube diameter | Ø 15.9 cm | Ø 8 cm |
| Max load / leg | 100 kg | 80 kg |
| Height | 71 cm standard | 71 cm made to measure |
| Unit price (H. 71 cm) | 90 € | 51 € |
| Visual | Assertive presence | Slim line, discreet |
Choose LE DÉVOUÉ for a visually dominant base or a load above 80 kg per leg. For a slimmer profile, a non-standard height or a lower budget, LE LOYAL ROUND MADE TO MEASURE.
This table base is available in nine professional-quality finishes that don't just look good - they protect.
Fine-texture powder-coated finishes: matt black (RAL 9005), high-gloss white (RAL 9003), cream (RAL 9001), green (RAL 6011), yellow (RAL 1023), blue (RAL 5002).
Metallic sandblasted effect powder-coated finishes: copper (Y2304I), gold (Y2316F).
Powder coating involves baking electrostatic polyester powder at 200°C. The result? A 60-80 micron protective coating that resists :
- Humidity: Rust-free, sheltered outdoor use (covered terrace, veranda)
- UV: No discoloration in sunlight
- Impact: Harder than simple varnish
- Corrosion: Integrated anti-corrosion protection.
It's THE professional finish par excellence for furniture that lasts
Protected raw finish: dark matte varnish (ADAPTA).
Find out more about our finishes, their meanings and decorating tips and tricks.
These finishes are resistant to humidity and UV, and suitable for sheltered indoor or outdoor use.
For custom color requests, please contact us.
Yes, but with the right finish.
Ultra-simple care:
Absolutely avoid:
- Abrasive products (scraping sponge, scouring powder)
- High-pressure cleaners
- Undiluted acidic products
To find out more, see our complete guide to steel maintenance at table legs .
Eco-responsibility is not just wishful thinking at Ripaton, but our daily commitment.
By choosing Ripaton, you are opting for locally manufactured products, designed with respect for the environment and craftsmanship.
More than just a table stand or shelf, it's a commitment to timeless, sustainable design.
In our Montpellier workshop, each product is designed locally, using only green, renewable energy.
The manufacture of steel, an infinitely recyclable material, is part of an eco-responsible approach that involves sourcing from certified European suppliers.
By choosing our products, you are opting for sustainable products designed to minimize environmental impact.
The longevity of our products reduces the need for frequent replacement, contributing to more sustainable consumption.
Our packaging? Made entirely from recycled and recyclable cardboard .
Our circular philosophy is also reflected in the reuse of our steel scraps: nothing is lost, everything is transformed. From bed frame legs to design furniture legs, each fragment finds its new life.
A responsible process for better production.
Delivery times in France: 48 h at home or in a relay point (working days), depending on destination for products in stock.
Delivery in the European Union: 48 to 72 h for products in stock.
Returns: you have 30 days after receipt to request an exchange, credit note or refund (excluding custom-made products).
Is your home beautiful? Show it off!
Mention @ripaton.fr
on your Instagram photos
to appear on our site.
Our (super) customers' opinions
. (Translated review)
It looks very sturdy and the matte finish is perfect (Translated review)
very beautiful, sturdy, French manufacturing, beautiful finishes, superb matte blue color, just a downside on the very significant weight (more than 4kg per foot), which heavily weighs down the table making it difficult to move. otherwise everything is fine (Translated review)
top and top quality (Translated review)
Price per unit
