Appreciated
by over 50,000
satisfied customers
Payment
in instalments
free of charge
Free delivery from €299
France, Belgium
Germany, Netherlands
Back
within 30 days
excluding custom orders
✓ Leg mikado central table offset in round steel tubing, height 71 cm - Knock-down
✓ For table tops rectangular or oval 140 to 220 cm long and 80 to 140 cm wide
✓ Maximum load-bearing capacity 80 kg - ideal for table tops solid wood, plywood, MDF or finger-jointed wood
✓ Powder-coated or varnished steel , protected for sheltered indoor and outdoor use - Resists humidity and UV
✓ Adjustable glides supplied, assembly 15 min - for dining table, meeting table or professional furniture.
Appreciated
by over 50,000
satisfied customers
Payment
in instalments
free of charge
Free delivery from €299
France, Belgium
Germany, Netherlands
Back
within 30 days
excluding custom orders
| Steel type | 80 mm diameter round tube |
| Height | 71cm |
| Length | 135 cm |
| Width | 75 cm |
| Maximum supported load | 80 kg |
| Holes | Ø 6.5 mm |
| Screws supplied | Yes |
| Glides supplied | Adjustable glides |
| Which L'AMBITIEUX version is right for your project? | ||
| Version | Round tubes | Square tubes |
| Model | Standard | Standard |
| Aesthetic | Organic, rounded lines | Assertive industrial |
| Finishes | 3 | 9 |
| Styles | Scandinavian, japandi, contemporary | Industrial, loft, urban |
L'AMBITIEUX - round tubes - is our table leg mikado centerpiece with its organic, off-axis design, designed to soften contemporary interiors without sacrificing stability.
Made in France in our Montpellier workshop, this base in 80 mm diameter round steel tubes transforms your dining table, desk or meeting table into a piece with assertive character but fluid lines.
Unlike the square-tube version with its angular industrial design, this round version creates soft cast shadows and blends in naturally with Scandinavian, Japandi or clean contemporary styles.
With a height of 71 cm, L'AMBITIEUX - round tubes - provides 80 kg of stability, ideal for table tops in solid wood, finger-jointed wood, MDF or plywood up to 220 cm long and 140 cm wide.
Its dismountable structure facilitates transport while guaranteeing uncompromising strength once assembled in just 15 minutes.
Thanks to its powder-coated or varnishedfinish, this base is resistant to humidity and UV rays, and can be used both indoors and outdoors(covered terrace, veranda, enclosed pergola).
Quick to assemble or dismantle with its pre-drilled plates and adjustable glides, it lets you create a unique living space where design and functionality meet.
L'AMBITIEUX - round tubes - is a centralbase in recyclable steel, designed to create tables with strong character but softened lines.
6-8 person dining table: The family table that makes a statement
Design teleworking desk
Sheltered outdoor table
Collaborative meeting table to assert your identity
Coworkingspace
Restaurant / caféfurniture
This round-tube version of L'AMBITIEUX asserts an organic vision of sustainable furniture that is bold, functional and proudly made in France.
Craftsmanship
French manufacturing
Distribution & Logistics
Montpellier workshop
Technical expertise
Project planning
Optimum sturdiness
Perfect adaptability
Solid furniture
built to last
Quality materials
European suppliers
Design office
creative and innovative
Innovative design,
ethical and authentic
This mikado table base is delivered flat-packed as a kit, complete with screws and adjustable glides. The recycled cardboard packaging protects the stand perfectly during transport.
Delivered flat-packed, it takes just 15 minutes to assemble, thanks to the digital instructions.
Clear instructions can be downloaded from the product page or accessed via the QR code on our Thank You card, supplied with the stand.
Assembly takes just a few minutes.
Follow the digital instructions to download from the product page or via the QR code provided on our Thank You card enclosed with your order.
No special tools required.
This table leg is specifically designed for rectangular or oval table tops .
For square or round table tops , opt for a symmetricalleg mikado like L'IDÉAL, which guarantees perfect visual balance over 360°.
Compatible materials:
- solid wood: oak, walnut, ash - thickness 2 to 7 cm (ideally 4 cm)
-multiplex plywood: minimum 18 mm, recommended 25-30 mm
- finger-jointed wood: perfect for long, economical lengths
- high-density MDF: if reinforced, minimum 30 mm
Caution: Heavy materials not recommended.
The weight and rigidity of these materials are NOT suitable for standard plates.
For marble, granite and waxed concrete, prefer the custom-made model in square tubes with reinforced plates.
The screws supplied (2.5 cm long) are calibrated for table tops wood from 20 to 50 mm thick.
For a thicker table top (6-7 cm), order long screws (4 cm) from the hardware store - Ø 6 mm, countersunk head.
L'AMBITIEUX is available in three professional-quality finishes that don't just look good - they protect.
Fine-textured powder-coated finishes:
Powder coating involves baking electrostatic polyester powder at 200°C. The result? A 60-80 micron protective coating that resists :
- Humidity: Rust-free, sheltered outdoor use (covered terrace, veranda)
- UV: No discoloration in sunlight
- Impact: Harder than simple varnish
- Corrosion: Integrated anti-corrosion protection.
It's THE professional finish par excellence for furniture that lasts.
Protected raw finish: ADAPTA dark matte varnish preserves the raw industrial look of steel while protecting it from oxidation.
Discover all our finishes, their meanings, decorating tips and tricks.
These finishes are resistant to humidity and UV, and suitable for sheltered indoor or outdoor use.
To request a custom color, please contact us.
Yes, but with the right finish.
Ultra-simple care:
Absolutely avoid:
- Abrasive products (scraping sponge, scouring powder)
- High-pressure cleaners
- Undiluted acidic products
To find out more, see our complete guide to steel maintenance at table legs .
Eco-responsibility is not just wishful thinking at Ripaton, but our daily commitment.
By choosing Ripaton, you are opting for locally manufactured products, designed with respect for the environment and craftsmanship.
More than just a table stand or shelf, it's a commitment to timeless, sustainable design.
In our Montpellier workshop, each product is designed locally, using only green, renewable energy.
The manufacture of steel, an infinitely recyclable material, is part of an eco-responsible approach that involves sourcing from certified European suppliers.
By choosing our products, you are opting for sustainable products designed to minimize environmental impact.
The longevity of our products reduces the need for frequent replacement, contributing to more sustainable consumption.
Our packaging? Made entirely from recycled and recyclable cardboard .
Our circular philosophy is also reflected in the reuse of our steel scraps: nothing is lost, everything is transformed. From bed frame legs to design furniture legs, each fragment finds its new life.
A responsible process for better production.
Delivery times in France: 48 h at home or in a relay point (working days), depending on destination for products in stock.
Delivery in the European Union: 48 to 72 h for products in stock.
Returns: you have 30 days after receipt to request an exchange, credit note or refund (excluding custom-made products).
Is your home beautiful? Show it off!
Mention @ripaton.fr
on your Instagram photos
to appear on our site.
Price per unit
