Le Sablier Steel hourglass table leg

The leg LE SABLIER supports up to 100 kg per leg.
With 2 legs, you have a total capacity of 200 kg, more than enough for all types of table tops and daily use.
For very heavy table tops in stone or concrete, add a third leg to guarantee the safety and durability of your installation.

Position table legs on table top, respecting the recess distances (15-20 cm from the edges).
Mark hole locations with a pencil.
Drill pilot holes slightly smaller in diameter than your screws.
Fasten with the screws supplied, tightening gradually.
Complete installation: 15 minutes for 2 legs.
The self-adhesive rubber pads are installed as a final step under the base of the leg.

With its height of 71 cm, LE SABLIER is suitable for standard dining tables (seat height 45 cm).
For high tables (90 cm) or kitchen islands (90-95 cm), discover our legs models in 90 cm height or made-to-measure.
Contact our team for personalized advice: [email protected]

If you require a different height (for a 40 cm coffee table, a 90 cm console), a specific wheelbase width or a customized RAL finish, please contact our team: [email protected].
Made-to-measure lead time: 3-4 weeks depending on complexity.
Free quote within 48 hours.

All our table legs products are handcrafted in our workshop in Montpellier, France.
Each leg is made from recyclable steel, then powder-coated or varnished according to your choice, and shipped in recycled cardboard packaging, for a sustainable, eco-responsible product.
We monitor every stage of production to guarantee consistent quality and impeccable finish.

To ensure optimum stability, the number and position of table legs must be adapted to the dimensions and weight of your table top.

The hourglass design distributes the load evenly across the width, limiting the risk of tipping on large table tops.

Use the 8 fixing points per base to ensure a rigid connection between the steel and your table top.

Yes, but with the right finish.

• Indoors: All finishes are ideal
• Sheltered exterior (covered terrace, pergola, veranda): Powder-coating recommended for maximum durability.
• Unsheltered exteriors: Not recommended (even with powder coating, water accumulation in the tubes could pose a long-term problem)

This table base is available in nine professional-quality finishes that don't just look good - they protect.

Fine-texture powder-coated finishes: matt black (RAL 9005), high-gloss white (RAL 9003), cream (RAL 9001), green (RAL 6011), yellow (RAL 1023), blue (RAL 5002).

Metallic sandblasted effect powder-coated finishes: copper (90354), gold (Y2316F).

Powder coating involves baking electrostatic polyester powder at 200°C. The result? A 60-80 micron protective coating that resists :

- Humidity: Rust-free, sheltered outdoor use (covered terrace, veranda)

- UV: No discoloration in sunlight

- Impact: Harder than simple varnish

- Corrosion: Integrated anti-corrosion protection.

It's THE professional finish par excellence for furniture that lasts

Protected raw finish: dark matte varnish (ADAPTA).

Find out more about our finishes, their meanings and decorating tips and tricks.

These finishes are resistant to humidity and UV, and suitable for sheltered indoor or outdoor use.

For custom color requests, please contact us.

Ultra-simple care:

• Regular cleaning: damp cloth + mild soap (pH neutral), then dry with a dry cloth
• White stains (limescale): Soft cloth soaked in white vinegar or cider vinegar, rinse, dry
• Sheltered exterior: Clean 2 times a year to remove pollen and dust

Absolutely avoid:

- Abrasive products (scraping sponge, scouring powder)

- High-pressure cleaners

- Undiluted acidic products

To find out more, see our complete guide to steel maintenance at table legs .

Eco-responsibility is not just wishful thinking at Ripaton, but our daily commitment.

By choosing Ripaton, you are opting for locally manufactured products, designed with respect for the environment and craftsmanship.
More than just a table stand or shelf, it's a commitment to timeless, sustainable design.

In our Montpellier workshop, each product is designed locally, using only green, renewable energy.

The manufacture of steel, an infinitely recyclable material, is part of an eco-responsible approach that involves sourcing from certified European suppliers.

By choosing our products, you are opting for sustainable products designed to minimize environmental impact.
The longevity of our products reduces the need for frequent replacement, contributing to more sustainable consumption.

Our packaging? Made entirely from recycled and recyclable cardboard .

Our circular philosophy is also reflected in the reuse of our steel scraps: nothing is lost, everything is transformed. From bed frame legs to design furniture legs, each fragment finds its new life.

A responsible process for better production.

Delivery times in France: 48 h at home or in a relay point (working days), depending on destination for products in stock.

Delivery in the European Union: 48 to 72 h for products in stock.

Returns: you have 30 days after receipt to request an exchange, credit note or refund (excluding custom-made products).