Le Dévoué Coffee table Wide straight round coffee table base in steel tubes

This depends on the shape and format of table top.

For a table top round, oval or organic up to 100-110 cm, 3 legs ensure stable balance and a sculpted look.

For a rectangular or square table top , 4 legs guarantee even load distribution, especially with heavy materials such as marble or granite.

Round, square, rectangular, oval or organically shapedtrays.

Compatible with all rigid materials: solid wood, plywood, MDF, marble, granite, tempered glass, terrazzo, waxed concrete.

Minimum recommended thickness: 2 cm for resistant screwing.

For table tops glass or fine stone, a polymer mastic glue can be used in addition to the screws.

Turn the table top over, position the plate where you want it, mark the 6 Ø 6.5 mm drilling points, pre-drill and screw.

The screws supplied are calibrated for table tops from 20 to 50 mm thick.

For thickertable top (up to 70 mm), use long screws (40 mm, Ø 6 mm, countersunk head) available from hardware stores.

Self-adhesive rubber pads are glued directly under the foot.

The cross-section and shape are identical.

Only the height changes: 40 cm for coffee tables, benches or bedside tables - 71 cm for dining tables and desks - 89 cm for high tables and kitchen islands.

A made-to-measure model is also available in heights from 30 to 100 cm.

The 9 finishes are common to all versions, creating coherent ensembles from living room to kitchen.

This table leg is available in nine professional-quality finishes that don't just look good - they protect.

Fine-texture powder-coated finishes: matt black (RAL 9005), high-gloss white (RAL 9003), cream (RAL 9001), green (RAL 6011), yellow (RAL 1023), blue (RAL 5002).

Metallic sandblasted effect powder-coated finishes: copper (Y2304I), gold (Y2316F).

Powder coating involves baking electrostatic polyester powder at 200°C. The result? A 60-80 micron protective coating that resists :

- Humidity: Rust-free, sheltered outdoor use (covered terrace, veranda)

- UV: No discoloration in sunlight

- Impact: Harder than simple varnish

- Corrosion: Integrated anti-corrosion protection.

It's THE professional finish par excellence for furniture that lasts

Protected raw finish: dark matte varnish (ADAPTA).

Find out more about our finishes, their meanings and decorating tips and tricks.

These finishes are resistant to humidity and UV, and suitable for sheltered indoor or outdoor use.

For custom color requests, please contact us.

Yes, but with the right finish.

• Indoors: All three finishes are ideal
• Sheltered exterior (covered terrace, pergola, veranda): Powder-coating recommended for maximum durability (10+ years maintenance-free)
• Unsheltered exteriors: Not recommended (even with powder coating, water accumulation in the tubes could pose a long-term problem)

Ultra-simple care:

• Regular cleaning: damp cloth + mild soap (pH neutral), then dry with a dry cloth
• White stains (limescale): Soft cloth soaked in white vinegar or cider vinegar, rinse, dry
• Sheltered exterior: Clean 2 times a year to remove pollen and dust

Absolutely avoid:

- Abrasive products (scraping sponge, scouring powder)

- High-pressure cleaners

- Undiluted acidic products

To find out more, see our complete guide to steel maintenance at table legs .

Yes. Each base is supplied with fixing screws suitable for table tops wood and self-adhesive rubber pads to protect the floor.

The holes are pre-drilled in 6.5 mm diameter for direct fixing from the underside of the table top.

Eco-responsibility is not just wishful thinking at Ripaton, but our daily commitment.

By choosing Ripaton, you are opting for locally manufactured products, designed with respect for the environment and craftsmanship.
More than just a table stand or shelf, it's a commitment to timeless, sustainable design.

In our Montpellier workshop, each product is designed locally, using only green, renewable energy.

The manufacture of steel, an infinitely recyclable material, is part of an eco-responsible approach that involves sourcing from certified European suppliers.

By choosing our products, you are opting for sustainable products designed to minimize environmental impact.
The longevity of our products reduces the need for frequent replacement, contributing to more sustainable consumption.

Our packaging? Made entirely from recycled and recyclable cardboard .

Our circular philosophy is also reflected in the reuse of our steel scraps: nothing is lost, everything is transformed. From bed frame legs to design furniture legs, each fragment finds its new life.

A responsible process for better production.

Delivery times in France: 48 h at home or in a relay point (working days), depending on destination for products in stock.

Delivery in the European Union: 48 to 72 h for products in stock.

Returns: you have 30 days after receipt to request an exchange, credit note or refund (excluding custom-made products).