L'Enveloppant Coffee table Cylindrical steel column coffee table leg

The column diameter determines the top size supported with full stability on a single leg.

With 2 legs, keep about 150 cm spacing per leg ; there is no maximum length, several legs allow a long coffee table.

Same central coffee table leg use. The difference is first geometric: L'ENVELOPPANT is a straight column, constant in diameter from floor to top ; L'ICONIQUE is a flared cone, wider at the floor than at the head.

Choose L'ICONIQUE COFFEE TABLE for a flared base that narrows toward the top ; L'ENVELOPPANT for a straight column, a monolith effect and larger tops.

The leg supports 80 kg per leg on rigid tops from 2 cm thick in solid wood, marble, granite, terrazzo or tempered glass. Effective fixing depends on top thickness and screwing quality.

For glass, marble or fine stone, a suitable polymer adhesive can complement the screws.

No specific tool or long bit is needed. Slot the two cross bars together, fix them under the top through their pre-drilled plates, then place the cylinder over them and screw it from the outside, on the sides, through the Ø 6.5 mm holes with the supplied screws.

The self-adhesive rubber pads protect the floor.

With a 2 to 4 cm top, you get a coffee table of 42 to 44 cm, the reference height for a living room.

Optionally, adjustable pads screwed under the base add 1.5 to 3 cm and compensate for uneven floors, bringing the leg alone to 41.5 to 43 cm.

Yes, but with the right finish.

• Indoors: All finishes are ideal
• Sheltered exterior (covered terrace, pergola, veranda): Powder-coating recommended for maximum durability (10+ years maintenance-free)
• Unsheltered exteriors: Not recommended (even with powder coating, water accumulation in the tubes could pose a long-term problem)

This table base is available in nine professional-quality finishes that don't just look good - they protect.

Fine-texture powder-coated finishes: matt black (RAL 9005), high-gloss white (RAL 9003), cream (RAL 9001), green (RAL 6011), yellow (RAL 1023), blue (RAL 5002).

Metallic sandblasted effect powder-coated finishes: copper (90354), gold (Y2316F).

Powder coating involves baking electrostatic polyester powder at 200°C. The result? A 60-80 micron protective coating that resists :

- Humidity: Rust-free, sheltered outdoor use (covered terrace, veranda)

- UV: No discoloration in sunlight

- Impact: Harder than simple varnish

- Corrosion: Integrated anti-corrosion protection.

It's THE professional finish par excellence for furniture that lasts

Protected raw finish: dark matte varnish (ADAPTA).

Find out more about our finishes, their meanings and decorating tips and tricks.

These finishes are resistant to humidity and UV, and suitable for sheltered indoor or outdoor use.

For custom color requests, please contact us.

Ultra-simple care:

• Regular cleaning: damp cloth + mild soap (pH neutral), then dry with a dry cloth
• White stains (limescale): Soft cloth soaked in white vinegar or cider vinegar, rinse, dry
• Sheltered exterior: Clean 2 times a year to remove pollen and dust

Absolutely avoid:

- Abrasive products (scraping sponge, scouring powder)

- High-pressure cleaners

- Undiluted acidic products

To find out more, see our complete guide to steel maintenance at table legs .

Eco-responsibility is not just wishful thinking at Ripaton, but our daily commitment.

By choosing Ripaton, you are opting for locally manufactured products, designed with respect for the environment and craftsmanship.
More than just a table stand or shelf, it's a commitment to timeless, sustainable design.

In our Montpellier workshop, each product is designed locally, using only green, renewable energy.

The manufacture of steel, an infinitely recyclable material, is part of an eco-responsible approach that involves sourcing from certified European suppliers.

By choosing our products, you are opting for sustainable products designed to minimize environmental impact.
The longevity of our products reduces the need for frequent replacement, contributing to more sustainable consumption.

Our packaging? Made entirely from recycled and recyclable cardboard .

Our circular philosophy is also reflected in the reuse of our steel scraps: nothing is lost, everything is transformed. From bed frame legs to design furniture legs, each fragment finds its new life.

A responsible process for better production.

Delivery times in France: 48 h at home or in a relay point (working days), depending on destination for products in stock.

Delivery in the European Union: 48 to 72 h for products in stock.

Returns: you have 30 days after receipt to request an exchange, credit note or refund (excluding custom-made products).