Appreciated
by over 50,000
satisfied customers
Payment
in instalments
free of charge
Free delivery from €299
France, Belgium
Germany, Netherlands
Back
within 30 days
excluding custom orders
✓ Central conical coffee table base in steel - height 40 cm
✓ Compatible with table tops square, round or oval from 50 to 100 cm
✓ Load supported up to 100 kg - table tops solid wood, marble, granite or glass
✓ Powder-coated steel - moisture and UV resistant - indoor and sheltered outdoor
✓ Adjustable glides supplied - for coffee table, side table, bedside table, pedestal table or bench.
Appreciated
by over 50,000
satisfied customers
Payment
in instalments
free of charge
Free delivery from €299
France, Belgium
Germany, Netherlands
Back
within 30 days
excluding custom orders
| Steel type | Sheet steel 1.5 mm thick |
| Height | 40 cm |
| Base plate | 3 mm thick |
| Top width with base plate | 36.05 cm |
| Top width without base plate | 30 cm wide |
| Bottom width | 50 cm |
| Maximum supported load | 100 kg |
| Holes | 6 × 6.5 mm |
| Glides supplied | Adjustable glides × 6 |
| Adjustable glides are screwed to the underside of the foot using an insert. They add 1 to 3 cm to the height of the base. | |
| The assembled base with adjustable glides measures a total height of between 41 and 43 cm. | |
If you require a different height,
L'ICONIQUE is available in two widths and as a 71 cm high dining table.
L'ICONIQUE COFFEE TABLE is the steel central conical coffee table leg for creating coffee tables with an organic, flowing character, in a minimalist, contemporary or industrial style.
Manufactured in our Montpellier workshop from 1.5 mm sheet steel with a 3 mm reinforced plate, it measures 40 cm high, 50 cm at the base and 36 cm below the table top.
It can support up to 100 kg and adapts to table tops square, round or oval50 to 100 cmsolid wood, marble, granite, terrazzo or tempered glass.
Its 7 powder-coated finishes provide long-lasting protection against humidity and UV rays, for use both indoors and outdoors.
Equipped with 6 pre-drilled mounting points on its base plate, it attaches directly to table top. The 6 adjustable glides supplied ensure perfect stability, even on uneven ground.
A coffee table version of the conical model in 71 cm height for dining tables, it harmonizes living and dining rooms with a common signature.
The conical silhouette of L'ICONIQUE COFFEE TABLE naturally recenters the weight of table top and ensures stable balance, even with dense materials such as solid wood, marble or granite.
Its 50 cm wide base and circular base plate distribute loads efficiently, without the need for peripheral feet, limiting the risk of tipping.
With no corner structure, it frees up floor space, facilitates circulation and frees up low seating areas - a real asset in small lounges and public areas alike.
Weighing just 7 kg, it can be easily moved and repositioned to adapt your layout to changing needs.
In a living room, it can be used as a coffee table under table top in solid oak, waxed concrete or terrazzo.
Used in pairs, it can also be used to create a bench or rectangular coffee table in a linear format.
In a bedroom or hallway, it serves as a compact base for a bedside table or sleek side table.
For architects, decorators and interior designers, its 7 finishes make it easy to create coherent series in hotels, boutiques and reception areas - with a load capacity adapted to intensive use.
Made in France from recyclable steel, it is designed to last and adapt to all projects, from one-off pieces to professional layouts.
Craftsmanship
French manufacturing
Distribution & Logistics
Montpellier workshop
Technical expertise
Project planning
Optimum sturdiness
Perfect adaptability
Solid furniture
built to last
Quality materials
European suppliers
Design office
creative and innovative
Innovative design,
ethical and authentic
This base is designed for table tops square, round or oval models from 50 to 100 cm.
It is compatible with all rigid materials:
A minimum thickness of 2 cm is recommended for secure fixing.
For fragile materials such as glass or fine stone, a suitable adhesive (polymer mastic) can be used in addition to screws.
The base supports up to 100 kg.
Effective fixing depends on the thickness of the table top and the quality of the screw.
Use the 6 holes provided with the screws supplied - calibrated for wooden table tops from 20 to 50 mm thick.
For thickertable top (up to 7 cm), use long screws (4 cm, Ø 6 mm, countersunk head) from the hardware store.
The shape conical and design are identical.
Only the height changes:
Both models are available in the same finishes and combine perfectly to create a coherent whole in the same room or between two spaces.
A central base frees up all the space around the table top:
The 50 cm wide base and 6 cm circular plate ensure stability without compromising aesthetics. It's also a strong design choice, making the base a visible and assertive element of the composition.
The base is supplied with 6 adjustable glides and 6 pre-drilled Ø 6.5 mm holes.
Turn the table top over. Position the mounting plate in the center of the table top, mark the holes, pre-drill the table top and screw in place.
Adjustable glides compensate for slight floor irregularities. No special tools are required to install the adjustable glides.
For table tops glass, granite or marble, opt for a suitable polymer mastic adhesive without screwing.
This table base is available in 7 professional-quality finishes that don't just look good - they protect.
Fine-texture powder-coated finishes: matt black (RAL 9005), cream (RAL 9001), green (RAL 6011), yellow (RAL 1023), blue (RAL 5002).
Metallic sandblasted effect powder-coated finishes: copper (Y2304I), gold (Y2316F).
Powder coating involves baking electrostatic polyester powder at 200°C. The result? A 60-80 micron protective coating that resists :
- Humidity: Rust-free, sheltered outdoor use (covered terrace, veranda)
- UV: no discoloration in sunlight
- Impact: Harder than simple varnish
- Corrosion: Integrated anti-corrosion protection.
It's THE professional finish par excellence for furniture that lasts
Discover all our finishes, their meanings, decorating tips and tricks.
These finishes are resistant to humidity and UV, and suitable for sheltered indoor or outdoor use.
For custom color requests, please contact us.
Yes, but with the right finish.
Ultra-simple care:
Absolutely avoid:
- Abrasive products (scraping sponge, scouring powder)
- High-pressure cleaners
- Undiluted acidic products
To find out more, see our complete guide to steel maintenance at table legs .
Eco-responsibility is not just wishful thinking at Ripaton, but our daily commitment.
By choosing Ripaton, you are opting for locally manufactured products, designed with respect for the environment and craftsmanship.
More than just a table stand or shelf, it's a commitment to timeless, sustainable design.
In our Montpellier workshop, each product is designed locally, using only green, renewable energy.
The manufacture of steel, an infinitely recyclable material, is part of an eco-responsible approach that involves sourcing from certified European suppliers.
By choosing our products, you are opting for sustainable products designed to minimize environmental impact.
The longevity of our products reduces the need for frequent replacement, contributing to more sustainable consumption.
Our packaging? Made entirely from recycled and recyclable cardboard .
Our circular philosophy is also reflected in the reuse of our steel scraps: nothing is lost, everything is transformed. From bed frame legs to design furniture legs, each fragment finds its new life.
A responsible process for better production.
Delivery times in France: 48 h at home or in a relay point (working days), depending on destination for products in stock.
Delivery in the European Union: 48 to 72 h for products in stock.
Returns: you have 30 days after receipt to request an exchange, credit note or refund (excluding custom-made products).
Is your home beautiful? Show it off!
Mention @ripaton.fr
on your Instagram photos
to appear on our site.
Price per unit
