L'Enveloppant Cylindrical central table leg made of steel tubing

The diameter 60 cm works as a single central base under large tops; the diameter 40 cm multiplies under long tables. Compatibility guide:

Assembly takes three steps.
Slot the two bars of the cross plate together.
Screw the cross under the top through its Ø 6.5 mm holes.
Slip the column over it, then lock the cylinder from the outside through the holes at the top of the circumference. Screws are included; no long-reach tool is needed.

Each column carries 100 kg. The 3 mm steel cross holds dense tops: solid wood, marble, granite, terrazzo or glass, from 20 mm thick. A 200 cm top on two bases gives a 200 kg capacity.

Optional adjustable feet, screwed into an insert under the base, add 1.5 to 3 cm. The height moves from 71 cm to a 72.5–74 cm range. Enough to level an uneven floor or fine-tune the final table height. The standard version includes self-adhesive rubber pads.

Yes, L'ENVELOPPANT COFFEE TABLE uses the same column at 40 cm height.

Both are steel central table legs 71 cm high with a Ø 40 or 60 cm footprint.

The geometry differs:

Choose L'ENVELOPPANT for a constant architectural volume and multi-leg modularity on long tables; L'ICONIQUE for a conical silhouette with height adjustment included.

Yes, but with the right finish.

• Indoors: All finishes are ideal
• Sheltered exterior (covered terrace, pergola, veranda): Powder-coating recommended for maximum durability (10+ years maintenance-free)
• Unsheltered exteriors: Not recommended (even with powder coating, water accumulation in the tubes could pose a long-term problem)

This table base is available in nine professional-quality finishes that don't just look good - they protect.

Fine-texture powder-coated finishes: matt black (RAL 9005), high-gloss white (RAL 9003), cream (RAL 9001), green (RAL 6011), yellow (RAL 1023), blue (RAL 5002).

Metallic sandblasted effect powder-coated finishes: copper (90354), gold (Y2316F).

Powder coating involves baking electrostatic polyester powder at 200°C. The result? A 60-80 micron protective coating that resists :

- Humidity: Rust-free, sheltered outdoor use (covered terrace, veranda)

- UV: No discoloration in sunlight

- Impact: Harder than simple varnish

- Corrosion: Integrated anti-corrosion protection.

It's THE professional finish par excellence for furniture that lasts

Protected raw finish: dark matte varnish (ADAPTA).

Find out more about our finishes, their meanings and decorating tips and tricks.

These finishes are resistant to humidity and UV, and suitable for sheltered indoor or outdoor use.

For custom color requests, please contact us.

Ultra-simple care:

• Regular cleaning: damp cloth + mild soap (pH neutral), then dry with a dry cloth
• White stains (limescale): Soft cloth soaked in white vinegar or cider vinegar, rinse, dry
• Sheltered exterior: Clean 2 times a year to remove pollen and dust

Absolutely avoid:

- Abrasive products (scraping sponge, scouring powder)

- High-pressure cleaners

- Undiluted acidic products

To find out more, see our complete guide to steel maintenance at table legs .

Eco-responsibility is not just wishful thinking at Ripaton, but our daily commitment.

By choosing Ripaton, you are opting for locally manufactured products, designed with respect for the environment and craftsmanship.
More than just a table stand or shelf, it's a commitment to timeless, sustainable design.

In our Montpellier workshop, each product is designed locally, using only green, renewable energy.

The manufacture of steel, an infinitely recyclable material, is part of an eco-responsible approach that involves sourcing from certified European suppliers.

By choosing our products, you are opting for sustainable products designed to minimize environmental impact.
The longevity of our products reduces the need for frequent replacement, contributing to more sustainable consumption.

Our packaging? Made entirely from recycled and recyclable cardboard .

Our circular philosophy is also reflected in the reuse of our steel scraps: nothing is lost, everything is transformed. From bed frame legs to design furniture legs, each fragment finds its new life.

A responsible process for better production.

Delivery times in France: 48 h at home or in a relay point (working days), depending on destination for products in stock.

Delivery in the European Union: 48 to 72 h for products in stock.

Returns: you have 30 days after receipt to request an exchange, credit note or refund (excluding custom-made products).