Le Rêveur Steel hairpin leg with 3 rods for bed frames, sofas, furniture in round steel

LE RÊVEUR offers two types of drilling on the baseplate to adapt to all types of structures:

Side mounting (on the sides of the base plate):

• Ideal for bed frames and box springs with peripheral crosspieces
• Allows screwing into the thickness of the wooden frame
• Suitable for sofas with exposed frame edges

Central fixing (in the center of the plate):

• Perfect for solid panels: under sideboards, TV stands, coffee tables, etc
• Uses supplied M8 screws for direct central screwing
• Recommended for slatted bed bases with bottom panel

Both fasteners are equally strong.
Choose according to the accessibility and structure of your furniture.
M8 screws and protective pads are supplied for both configurations.

LE RÊVEUR is distinguished by its 3-stem configuration, which offers superior stability to conventional 2-rod hairpin leg.

3-rod advantages:

• Better weight distribution as an equilateral triangle
• Less risk of tipping over on heavy furniture
• Greater resistance to dynamic loads (sofa, bed)

The 20 cm height allows :

• passage of robot vacuum cleaner (height 8-12 cm)
• under-cabinet storage with boxes up to 15 cm high
• discreet elevation without altering the furniture's proportions
• ergonomically adapted to raise a low sofa or make it easier to get out of bed

Comparison with other pin-legs:

• L'ORIGINAL COFFEE TABLE: 2 rods, heights 30 or 40 cm, for coffee tables and benches.
• L'ORIGINAL: 2 rods, 71 or 90 cm high, mainly for tables and desks.
• LE COSTAUD COFFEE TABLE: 3 rods, heights 30 or 40 cm, for coffee tables and benches.
• LE COSTAUD: 3 rods, 71 or 90 cm high, mainly for tables and desks.
• LE RÊVEUR: 3 rods, fixed height 20 cm, designed for low furniture and heavy-duty furniture.

If you're looking for an extra height above 20 cm, consider L'ORIGINAL TABLE BASSE in heights of 30 or 40 cm.
For a specific custom height from 16 cm, configure your dimensions with the custom 3-rod model.

LE RÊVEUR adapts to most bed and sofa structures:

Compatible bases :

• Slatted bed bases with all-round wooden frame
• Box springs with rigid structure
• Bed frames in solid wood, plywood or panels
• Box springs with flat bottoms

To avoid: Unframed bedsteads, thin metal structures without solid attachment points.

Compatible sofas:

• Sofas with wooden frame under seat
• Banquettes and meridiennes with rigid frames

To avoid: Fully upholstered sofas with no visible structure, armchairs with integrated, non-removable original legs.

Pre-purchase checks:

• Ensure that the underside of the furniture provides a flat surface of at least 8 × 15 cm for the turntable
• Check wood thickness (minimum 15 mm for side screwing)
• Measure distance between edges to position feet 10-15 cm from corners

If in doubt about compatibility, send us a photo of the underside of your furniture: we'll confirm feasibility.

The positioning of the legs determines the stability of your furniture.
Here are our installation recommendations.

Position legs 10-15 cm from corners to distribute weight evenly and avoid overhangs.

For a bed frame :

• 4 legs: at 4 corners
• 5 legs: at 4 corners + 1 in the center under the lumbar area
• 6 legs: at 4 corners + 2 in the center of each length

For a sofa:

• Place leg under high-pressure areas: arms and main seats
• Avoid concentrating the feet only under the arms if the seat is long

For a TV cabinet or sideboard:

• 4 legs: symmetrical positioning at corners, set back 10 cm
• Center the weight if you are placing heavy equipment (TV, speakers)

Pro tip:
Use a spirit level during installation to check that the furniture doesn't tilt.
Adjust with the supplied glides if your floor is uneven.

LE RÊVEUR is made of 10 mm diameter round steel, a material that can be recycled ad infinitum, in our Montpellier workshop powered by 100% green, renewable energy.

Material and manufacturing :

• High-quality raw steel sourced from European suppliers
• Hand-welded for strength and durability
• Powder-coated finishes applied locally without toxic solvents

Eco-responsible approach:

• Local production to reduce transport footprint
• Reuse of steel offcuts to manufacture small products: our range of furniture legs comes in part from table leg offcuts.
• 100% recycled cardboard packaging
• Repairable product: in the event of damage, contact us for reconditioning rather than replacement

Durability:

Steel offers exceptional resistance to impact, wear and weather. Unlike plastic or chipboard legs, LE RÊVEUR will stand the test of time.
A lasting investment for furniture that grows with you.

We offer two carefully selected finishes to match any interior style:

Matte black fine texture - RAL 9005:

Plain black powder-coating that completely covers the steel. An elegant, timeless finish, ideal for a modern, sophisticated look. Matches all types of wood and materials.

Brilliant white - RAL 9003:

Brilliant white powder coating covering the steel. A luminous finish that brings purity and refinement, perfect for Scandinavian or minimalist interiors. Its lustrous reflections create an impression of lightness.

The powder-coated finish protects the steel against humidity, corrosion and UV rays, enabling it to be used both indoors and outdoors under cover (covered terrace, veranda, loggia).

Customized finishes:

For professional projects requiring specific colors (visual identity, harmonization with existing furniture), we offer custom powder coating in the full RAL range.
Contact our B2B team for a personalized quote.

LE RÊVEUR requires minimal maintenance thanks to its robust steel and powder-coated protection.

Routine cleaning:

• Soft, slightly damp cloth to remove dust
• Dry immediately to avoid water marks

Stubborn stains :

• Mild detergent such as diluted washing-up liquid
• Non-abrasive sponge
• Rinse with clean water and dry

Absolutely avoid :

• Abrasive products (scouring powder, scrubbing sponge)
• Corrosive products (bleach, acid descalers)
• High-pressure cleaners
• Aggressive solvents

Sheltered outdoor use:

If you use LE RÊVEUR on a covered terrace or veranda, clean it 2 or 3 times a year to remove atmospheric residues. Check the condition of the runners and replace them if necessary to avoid stagnant humidity.

Durability:

The powder-coated finish offers long-lasting protection.
In the event of deep scratches, please contact us: we'll be happy to offer you a touch-up or reconditioning service.

To find out more, see our complete guide to maintaining steel table legs (applicable to all our steel products).

Delivery times :

• Metropolitan France: 48 h at home or at a relay point after dispatch (working days)
• European Union: 48 to 72 h after dispatch
• Products in stock shipped within 48 h after order confirmation

Free delivery for orders over €299 in mainland France, Germany, the Netherlands and Belgium.

Returns and exchanges :

You have 30 days after receipt to request an exchange, credit note or refund (excluding custom-made products).