Appreciated
by over 50,000
satisfied customers
Payment
in instalments
free of charge
Free delivery from €299
France, Belgium
Germany, Netherlands
Back
within 30 days
excluding custom orders
-
Products from the same category
L'Intrépide Coffee Table Square tubular steel coffee table base 6 × 3 cm
✓ Square coffee table leg 40 × 40 cm in 6 × 3 cm steel tubes
✓ Height 40 cm to build a coffee table, side table, bedside table, pedestal or bench
✓ Compatible with tops from 40 cm wide up to 160 cm long
✓ Holds 100 kg per leg : tops in solid wood, marble, terrazzo, tempered glass and polished concrete
✓ Powder-coated or varnished steel : moisture resistant, indoor and sheltered outdoor, terrace, balcony.
Appreciated
by over 50,000
satisfied customers
Payment
in instalments
free of charge
Free delivery from €299
France, Belgium
Germany, Netherlands
Back
within 30 days
excluding custom orders
Description
Dimensions
Specifications
Frequently asked questions
This product at our customers'
Our customers' reviews
| Material | Steel |
| Steel section | 60 × 30 mm |
| Cross-section - Thickness | 1.5 mm |
| Height | 400 mm |
| Length | 400 mm |
| Maximum load per leg | 10 kg |
| Hole diameter | 6.5 mm |
| Screws included | Yes |
| Pads included | Self-adhesive rubber |
| Finishes | Powder-coated, Varnished |
| Assembly | Welded |
| Option | Adjustable glides |
| The adjustable glides are screwed under the base of the leg using an insert. They allowyou to add 1.5 to 3 cm to the leg height (40 cm). | |
| With this option, a leg with adjustable glides, you will have a total height between 41.5 and 43 cm. | |
| Available models | Height × Width |
| For a dining table, a desk | 71 × 60 - 90 - 100 cm |
| For a high table, kitchen islands | from 20 to 120 cm |
| For large tables up to 250 cm with crossbar | from 20 to 120 cm |
Looking for a different size?
Customize your rectangular or square table leg made-to-measure by choosing from two steel tube sections:
60 × 30 mm or 80 × 40 mm.
L'INTRÉPIDE COFFEE TABLE is a square coffee table leg in an industrial and contemporary style.
Four 6 × 3 cm steel tubes, two vertical and two horizontal, are welded into a 40 × 40 cm square.
This section and the welded build deliver strength and stability.
The geometry stays simple and brings a minimalist presence.
It fits an industrial loft as easily as a pared-back interior.
Made in Montpellier, each leg holds 100 kg, for tops 40 to 160 cm long.
The top can be wood, marble, granite, terrazzo, polished concrete, tempered glass or recycled plastic.
Powder-coated or varnished, the steel resists moisture, indoors and in a sheltered outdoor setting.
The upper horizontal tube acts as the mounting plate.
Pre-drilled, it fixes to the top with the supplied screws.
Assembly takes 15 minutes.
Rubber pads included; as an option, add adjustable pads to raise the leg by 1.5 to 3 cm or to absorb uneven floors.
It pairs with the other L'INTRÉPIDE legs to build a full furniture line: with the standard 71 cm leg, compose a bench, coffee table and dining table set; with the made-to-measure leg, add a matching high console.
Build a coffee table at the heart of the living room
Two coffee table legs, one top, and the table takes shape. No stretcher, no central leg: the steel base frees the floor space. The room breathes.
Play with material
On a terrazzo or marble top, the steel leg stays discreet. In a dark finish, it slips under the stone. In copper or gold, it warms the composition.
Change the use, keep the style
The square 40 cm leg goes beyond the coffee table.
Under a round top, it becomes a pedestal or bedside table. Under a narrow board, it supports a hallway console or raises a TV unit. Under a seat, it works as a bench leg.
Take the coffee table outdoors
On a covered terrace, slide two square coffee table legs under a top and set up the lounge outside.
On a balcony, they hold the morning coffee on a square coffee table, sheltered under an eave.
Seasons pass, the leg stays put.
Fit out a professional project
In a hotel or a co-working space, furniture takes the traffic. A dense top, marble or granite, and the square steel legs keep the pace.
The finishes match the rest of the range, from a welcome lounge to a bar area.
Craftsmanship
French manufacturing
Distribution & Logistics
Montpellier workshop
Technical expertise
Project planning
Optimum sturdiness
Perfect adaptability
Solid furniture
built to last
Quality materials
European suppliers
Design office
creative and innovative
Innovative design,
ethical and authentic
Frequently asked questions
L'INTRÉPIDE COFFEE TABLE is sold individually. You need 2 legs to build a complete base under a rectangular or oval top.
Position them 5 to 10 cm from the short edges for balanced load distribution, 100 kg per leg, 200 kg for two.
L'INTRÉPIDE COFFEE TABLE fits tops 40 to 160 cm long, from 40 cm wide, 20 to 70 mm thick.
Materials: solid wood, plywood, marble, granite, terrazzo, polished concrete, tempered glass and recycled plastic.
Screwing requires at least 20 mm thickness for the supplied screws.
| Material | Thickness | Fixing method |
|---|---|---|
| Solid wood, plywood | 20 to 70 mm | 4 supplied screws (pre-drilled plate) |
| Recycled plastic | 20 to 70 mm | Screwing depending on substrate |
| Tempered glass, marble, granite, terrazzo | 20 to 70 mm | Can be glued, no screwing |
| Polished concrete | 20 to 70 mm | Follow the top manufacturer's recommendations |
Leg height: 40 cm.
Total height = leg height + top thickness.
Examples: 20 mm top → 42 cm table; 70 mm top → 47 cm table.
As an option, adjustable pads add 1.5 to 3 cm, bringing leg height to 41.5 to 43 cm.
On a wooden top (solid, plywood), fixing is done with the 4 supplied screws via the pre-drilled top plate, mounted in minutes.
On a tempered glass, marble, granite or terrazzo top, the legs can be glued without screwing.
The L'INTRÉPIDE range covers four configurations, from the living room to the professional kitchen, all matching each other.
| Model | Height | Tube section | Uses |
|---|---|---|---|
| L'INTRÉPIDE COFFEE TABLE | 40 cm | 6 × 3 cm | Coffee table, bench, side table |
| L'INTRÉPIDE 71 cm | 71 cm | 6 × 3 cm | Dining table, desk; standard widths 71 × 60 and 71 × 90 cm |
| L'INTRÉPIDE made-to-measure | 20 to 120 cm | 6 × 3 or 8 × 4 cm | Furniture leg, worktop, kitchen island, standing table; custom width |
| L'INTRÉPIDE made-to-measure frame | 20 to 120 cm | 6 × 3 or 8 × 4 cm | 2 legs + 1 or 2 top rails; leg lengths 40, 60, 80, 100 cm; total length 80 to 250 cm |
Yes, but with the right finish.
- Indoors: All finishes are ideal
- Sheltered exterior (covered terrace, pergola, veranda): Powder-coating recommended for maximum durability.
- Unsheltered exteriors: Not recommended (even with powder coating, water accumulation in the tubes could pose a long-term problem)
This table base is available in nine professional-quality finishes that don't just look good - they protect.
Fine-texture powder-coated finishes: matt black (RAL 9005), high-gloss white (RAL 9003), cream (RAL 9001), green (RAL 6011), yellow (RAL 1023), blue (RAL 5002).
Metallic sandblasted effect powder-coated finishes: copper (90354), gold (Y2316F).
Powder coating involves baking electrostatic polyester powder at 200°C. The result? A 60-80 micron protective coating that resists :
- Humidity: Rust-free, sheltered outdoor use (covered terrace, veranda)
- UV: No discoloration in sunlight
- Impact: Harder than simple varnish
- Corrosion: Integrated anti-corrosion protection.
It's THE professional finish par excellence for furniture that lasts
Protected raw finish: dark matte varnish (ADAPTA).
Find out more about our finishes, their meanings and decorating tips and tricks.
These finishes are resistant to humidity and UV, and suitable for sheltered indoor or outdoor use.
For custom color requests, please contact us.
Ultra-simple care:
- Regular cleaning: damp cloth + mild soap (pH neutral), then dry with a dry cloth
- White stains (limescale): Soft cloth soaked in white vinegar or cider vinegar, rinse, dry
- Sheltered exterior: Clean 2 times a year to remove pollen and dust
Absolutely avoid:
- Abrasive products (scraping sponge, scouring powder)
- High-pressure cleaners
- Undiluted acidic products
To find out more, see our complete guide to steel maintenance at table legs .
Eco-responsibility is not just wishful thinking at Ripaton, but our daily commitment.
By choosing Ripaton, you are opting for locally manufactured products, designed with respect for the environment and craftsmanship.
More than just a table stand or shelf, it's a commitment to timeless, sustainable design.
In our Montpellier workshop, each product is designed locally, using only green, renewable energy.
The manufacture of steel, an infinitely recyclable material, is part of an eco-responsible approach that involves sourcing from certified European suppliers.
By choosing our products, you are opting for sustainable products designed to minimize environmental impact.
The longevity of our products reduces the need for frequent replacement, contributing to more sustainable consumption.
Our packaging? Made entirely from recycled and recyclable cardboard .
Our circular philosophy is also reflected in the reuse of our steel scraps: nothing is lost, everything is transformed. From bed frame legs to design furniture legs, each fragment finds its new life.
A responsible process for better production.
Delivery times in France: 48 h at home or in a relay point (working days), depending on destination for products in stock.
Delivery in the European Union: 48 to 72 h for products in stock.
Returns: you have 30 days after receipt to request an exchange, credit note or refund (excluding custom-made products).
Is your home beautiful? Show it off!
This product at home
Mention @ripaton.fr
on your Instagram photos
to appear on our site.
Our (super) customers' opinions
You say it
better than we do
-
Magnificent (Translated review)
-
Very good product but very expensive (Translated review)
€75.00
Price per unit
€75.00